Protect pedestrians. The biggest advantage of the plastic bumper is that it can protect pedestrians. If the vehicle hits pedestrians while driving, the impact force can be fully absorbed to minimize the damage to pedestrians. Second, it is easy to maintain. It is normal to have slight bumps when using the car, and the bumper is a place that is easy to damage.
Relatively low price: For car companies, it is also very important to reduce the production cost of cars, so many car companies choose to use plastic bumpers, which can invest in the research and development of other components to provide better services for consumers.
The price is relatively low and economical.Considering that the use of plastic car bumpers can save the cost of manufacturing, and the funds can be used in work such as material research and development to improve the performance of the whole vehicle. In addition, it has strong plasticity, which is convenient for design and production.
Car bumper is a decorative device installed at the front and rear of the car, which can absorb and relieve external shocks and protect the safety of the body and passengers. Many years ago, car bumpers were mainly made of metal materials, and the surface was plated with a layer of chrome. The U-channel steel is riveted together with the longitudinal beam of the frame, which plays a protective role.
The lighter the quality of the plastic bumper, the lighter the quality of the car, the more ideal the fuel consumption, and the better the braking effect; the plastic bumper also has good insulation, anti-corrosion, aging resistance, wear resistance, scrubbrush resistance, waterproof, and in the event of a slight collision, it can also automatically recover according to its own elasticity.
Plastic bumpers can not only save manufacturing costs, but also have lower requirements for the industrial level and are easier to produce. Therefore, after the cost of car manufacturing is controlled, the price of the final product to consumers will also be more reasonable, which must correspond. Of course, in addition to plastic bumpers, some top sports cars will also use a large number of carbon fiber materials.
Legal. It is legal to change the modified front bar of the car. You need to go to the DMV for the record and change the shape of the vehicle. If the registration is changed, it is not illegal, and if it is not registered, it is illegal. The car bumper is a safety device that absorbs and slows down external impact and protects the front and rear of the car body.
[Pacific Automobile Network]Without the prior approval of the traffic management department, the car with modified bumpers is of course illegal and cannot pass the annual inspection normally. Even after the approval of the traffic management department, it should be noted that the vehicle license plate is inadvertently covered, which is an illegal act of deliberately covering and damaging the license plate.
It is legal to change the modified front bar of the car, but it needs to be filed with the DMA. According to the provisions of China's motor vehicle registration regulations, if the vehicle bumper is replaced, if the vehicle body is changed, if the registration is changed, it is not illegal, and if it is not registered, it is illegal.
The bumper of the car is on the head of the car, called the front bumper of the car, which is called the tail of the car It's the rear bumper. As a car accessory, car bumpers are easy to be rubbed in daily driving, and are also common parts in daily driving.
The head of the car. As a protective component of the front of the vehicle, the front bumper of the car can absorb and reduce the impact of the collision in the event of a collision, and protect the front structure of the vehicle and important parts of the engine from serious damage.
The front lever of the car is also called the front bumper of the car. The bumper of the car is at the head of the car, which is called the front bumper of the car, and the rear bumper at the rear of the car.The bumper is located in most areas in the front and rear of the car. It mainly absorbs and mitigates external impacts and protects the front and rear safety devices of the car body.
Park the vehicle on the lift. After taking safety measures, lift the vehicle to the appropriate height. Remove the rear bumper bolts from the left and right sides. Pull the rear bumper out of the guide groove in parallel, and the bumper is disassembled.
First, you need to park the vehicle on the flat ground and pull up the handbrake. When disassembling, you need to pay attention to the lights and lines on the bumper. When disassembling, remove the wire and lamp first, and finally remove the bumper. Remove the wires, screws and hidden snaps and take them off.
First, remove the screw under the front bumper, then open the front cover, open the front cover and remove the headlight screw. If you feel that it is difficult to remove when removing the left and right wing plates, you can turn the steering wheel and adjust it to the appropriate position. Finally, remove the bumper safely by removing a few screws on the keel. Pay special attention to the lights and lines on the bumper.
First, park the vehicle and turn off the engine. Second, it is the process of removing various screws. Stand in front of the car, find a total of 4 screws on both sides of the front wheel, and then remove them with a wrench. Lying on the ground and sticking your head under the car, you will see a total of 6 screws, and then remove them with a sleeve.
Step 1: First, turn the car to the right to the full wheel, turn off the engine, and disconnect the negative pole of the battery. Step 2: Remove the fixing screws.
As shown in the figure below, remove the front bumper 01 and unswell the bolts 3 and 4 on the left and right sides. 02 UNSTW THE BOLTS ON THE LEFT AND RIGHT SIDES 2 (FACING UP). Only with the help of another mechanic can it be further disassembled.
1. Among all the exterior parts of the car, the most easily damaged part is the front and rear bumper. If the bumper is seriously deformed or broken, it can only be replaced. However, in general, if the bumper is only deformed by a gentle impact, or a very serious crack appears, there is a way to repair it without replacing it.
2. In view of what you said, the insurance company can only compensate for the repair and baking of the front bar.
3. Unless in one case, the insurance company may replace you with a new one, the car is a luxury car, etc., and then affects driving safety, which is also a particularly serious situation that can only be replaced with a new one. It's normal for the car to bump. The bumper is all plastic. If you hit it a few more times, you won't feel it, and you won't be so entangled. Calm down.
4. Under normal circumstances, car insurance claims are prioritized by repair. If it needs to be replaced, the degree of damage must first meet the standards required by the insurance company before it can be replaced. The reference terms of vehicle damage insurance are as follows: Article 16 Insured motor vehicles damaged by insurance accidents shall be repaired as much as possible.
5. No. The insurance company's principle for bumper claims is that if there is damage, it will be replaced. If there is no damage, it can only be repaired if it is deformed. If the bumper is flat, the insurance company cannot replace it.The car bumper is a safety device that absorbs and slows down external impact and protects the front and rear of the car body.
Car bumpers are mainly the outer bar part made of plastic. Behind the outer bar is the bumper bracket, which is generally made of iron material that is easy to deform. It's done. At both ends of the bumper, there are two bumper cards, in addition to some bumper covers, such as ventilation grilles and traction covers.
The plastic bumper of a general car is composed of three parts: outer plate, cushioning material and beam. Among them, the outer plate and buffer material are made of plastic, and the crossbeam is stamped into a U-shaped groove with cold-rolled thin plate; the outer plate and buffer material are attached to the crossbeam.
Under normal circumstances, the bumper maintenance is carried out with the car. During the maintenance of the vehicle, the bumper can be overhauled. If there is a problem, try to focus on repair. If the exercise surface is really large, it can be replaced directly. Compared with repair, the price is relatively higher.
Nowadays, the front and rear bumpers of cars are made of plastic. The plastic bumpers of ordinary cars are composed of three parts: outer plate, cushioning material and crossbeam. Among them, the outer plate and cushioning material are made of plastic, and the crossbeam is stamped with cold-rolled thin plate to form a U-shaped groove. The outer plate and buffer material are attached to the crossbeam, and the shape is more harmonious and unified with the car body, and lighter.
And the bumpers of Volkswagen's Audi 100, Golf, Shanghai's Santana, Tianjin's Charley and other models of cars are made of polypropylene materials and injection molding.
HS code-based container load planning-APP, download it now, new users will receive a novice gift pack.
Protect pedestrians. The biggest advantage of the plastic bumper is that it can protect pedestrians. If the vehicle hits pedestrians while driving, the impact force can be fully absorbed to minimize the damage to pedestrians. Second, it is easy to maintain. It is normal to have slight bumps when using the car, and the bumper is a place that is easy to damage.
Relatively low price: For car companies, it is also very important to reduce the production cost of cars, so many car companies choose to use plastic bumpers, which can invest in the research and development of other components to provide better services for consumers.
The price is relatively low and economical.Considering that the use of plastic car bumpers can save the cost of manufacturing, and the funds can be used in work such as material research and development to improve the performance of the whole vehicle. In addition, it has strong plasticity, which is convenient for design and production.
Car bumper is a decorative device installed at the front and rear of the car, which can absorb and relieve external shocks and protect the safety of the body and passengers. Many years ago, car bumpers were mainly made of metal materials, and the surface was plated with a layer of chrome. The U-channel steel is riveted together with the longitudinal beam of the frame, which plays a protective role.
The lighter the quality of the plastic bumper, the lighter the quality of the car, the more ideal the fuel consumption, and the better the braking effect; the plastic bumper also has good insulation, anti-corrosion, aging resistance, wear resistance, scrubbrush resistance, waterproof, and in the event of a slight collision, it can also automatically recover according to its own elasticity.
Plastic bumpers can not only save manufacturing costs, but also have lower requirements for the industrial level and are easier to produce. Therefore, after the cost of car manufacturing is controlled, the price of the final product to consumers will also be more reasonable, which must correspond. Of course, in addition to plastic bumpers, some top sports cars will also use a large number of carbon fiber materials.
Legal. It is legal to change the modified front bar of the car. You need to go to the DMV for the record and change the shape of the vehicle. If the registration is changed, it is not illegal, and if it is not registered, it is illegal. The car bumper is a safety device that absorbs and slows down external impact and protects the front and rear of the car body.
[Pacific Automobile Network]Without the prior approval of the traffic management department, the car with modified bumpers is of course illegal and cannot pass the annual inspection normally. Even after the approval of the traffic management department, it should be noted that the vehicle license plate is inadvertently covered, which is an illegal act of deliberately covering and damaging the license plate.
It is legal to change the modified front bar of the car, but it needs to be filed with the DMA. According to the provisions of China's motor vehicle registration regulations, if the vehicle bumper is replaced, if the vehicle body is changed, if the registration is changed, it is not illegal, and if it is not registered, it is illegal.
The bumper of the car is on the head of the car, called the front bumper of the car, which is called the tail of the car It's the rear bumper. As a car accessory, car bumpers are easy to be rubbed in daily driving, and are also common parts in daily driving.
The head of the car. As a protective component of the front of the vehicle, the front bumper of the car can absorb and reduce the impact of the collision in the event of a collision, and protect the front structure of the vehicle and important parts of the engine from serious damage.
The front lever of the car is also called the front bumper of the car. The bumper of the car is at the head of the car, which is called the front bumper of the car, and the rear bumper at the rear of the car.The bumper is located in most areas in the front and rear of the car. It mainly absorbs and mitigates external impacts and protects the front and rear safety devices of the car body.
Park the vehicle on the lift. After taking safety measures, lift the vehicle to the appropriate height. Remove the rear bumper bolts from the left and right sides. Pull the rear bumper out of the guide groove in parallel, and the bumper is disassembled.
First, you need to park the vehicle on the flat ground and pull up the handbrake. When disassembling, you need to pay attention to the lights and lines on the bumper. When disassembling, remove the wire and lamp first, and finally remove the bumper. Remove the wires, screws and hidden snaps and take them off.
First, remove the screw under the front bumper, then open the front cover, open the front cover and remove the headlight screw. If you feel that it is difficult to remove when removing the left and right wing plates, you can turn the steering wheel and adjust it to the appropriate position. Finally, remove the bumper safely by removing a few screws on the keel. Pay special attention to the lights and lines on the bumper.
First, park the vehicle and turn off the engine. Second, it is the process of removing various screws. Stand in front of the car, find a total of 4 screws on both sides of the front wheel, and then remove them with a wrench. Lying on the ground and sticking your head under the car, you will see a total of 6 screws, and then remove them with a sleeve.
Step 1: First, turn the car to the right to the full wheel, turn off the engine, and disconnect the negative pole of the battery. Step 2: Remove the fixing screws.
As shown in the figure below, remove the front bumper 01 and unswell the bolts 3 and 4 on the left and right sides. 02 UNSTW THE BOLTS ON THE LEFT AND RIGHT SIDES 2 (FACING UP). Only with the help of another mechanic can it be further disassembled.
1. Among all the exterior parts of the car, the most easily damaged part is the front and rear bumper. If the bumper is seriously deformed or broken, it can only be replaced. However, in general, if the bumper is only deformed by a gentle impact, or a very serious crack appears, there is a way to repair it without replacing it.
2. In view of what you said, the insurance company can only compensate for the repair and baking of the front bar.
3. Unless in one case, the insurance company may replace you with a new one, the car is a luxury car, etc., and then affects driving safety, which is also a particularly serious situation that can only be replaced with a new one. It's normal for the car to bump. The bumper is all plastic. If you hit it a few more times, you won't feel it, and you won't be so entangled. Calm down.
4. Under normal circumstances, car insurance claims are prioritized by repair. If it needs to be replaced, the degree of damage must first meet the standards required by the insurance company before it can be replaced. The reference terms of vehicle damage insurance are as follows: Article 16 Insured motor vehicles damaged by insurance accidents shall be repaired as much as possible.
5. No. The insurance company's principle for bumper claims is that if there is damage, it will be replaced. If there is no damage, it can only be repaired if it is deformed. If the bumper is flat, the insurance company cannot replace it.The car bumper is a safety device that absorbs and slows down external impact and protects the front and rear of the car body.
Car bumpers are mainly the outer bar part made of plastic. Behind the outer bar is the bumper bracket, which is generally made of iron material that is easy to deform. It's done. At both ends of the bumper, there are two bumper cards, in addition to some bumper covers, such as ventilation grilles and traction covers.
The plastic bumper of a general car is composed of three parts: outer plate, cushioning material and beam. Among them, the outer plate and buffer material are made of plastic, and the crossbeam is stamped into a U-shaped groove with cold-rolled thin plate; the outer plate and buffer material are attached to the crossbeam.
Under normal circumstances, the bumper maintenance is carried out with the car. During the maintenance of the vehicle, the bumper can be overhauled. If there is a problem, try to focus on repair. If the exercise surface is really large, it can be replaced directly. Compared with repair, the price is relatively higher.
Nowadays, the front and rear bumpers of cars are made of plastic. The plastic bumpers of ordinary cars are composed of three parts: outer plate, cushioning material and crossbeam. Among them, the outer plate and cushioning material are made of plastic, and the crossbeam is stamped with cold-rolled thin plate to form a U-shaped groove. The outer plate and buffer material are attached to the crossbeam, and the shape is more harmonious and unified with the car body, and lighter.
And the bumpers of Volkswagen's Audi 100, Golf, Shanghai's Santana, Tianjin's Charley and other models of cars are made of polypropylene materials and injection molding.
Import data trends visualization
author: 2024-12-24 00:40High-value machinery HS code classification
author: 2024-12-24 00:19Integrated circuits HS code verification
author: 2024-12-23 23:51Comparative HS code duty analysis
author: 2024-12-23 23:35China trade data analysis tools
author: 2024-12-24 00:51Global trade resource libraries
author: 2024-12-24 00:49Trade data-driven market penetration
author: 2024-12-24 00:47Pharma excipients HS code classification
author: 2024-12-24 00:03Advanced import export metric tracking
author: 2024-12-23 23:35
How to leverage open-source trade data
753.79MB
Check
HS code alignment with sustainability targets
592.87MB
Check
How to track global shipments
756.31MB
Check
HS code tagging in tariff databases
676.21MB
Check
Global HS code classification standards
548.28MB
Check
Agriculture trade by HS code in Africa
666.78MB
Check
Analytical tools for trade diversification
339.84MB
Check
Trade data for enterprise resource planning
927.94MB
Check
Global trade compliance best practices
956.58MB
Check
HS code-based segment analysis for FMCG
585.79MB
Check
Cross-verifying suppliers by HS code
262.49MB
Check
HS code-driven product bundling strategies
133.39MB
Check
Predictive analytics in international trade
153.46MB
Check
Industry consolidation via HS code data
546.27MB
Check
Africa import data trends
712.15MB
Check
Pharmaceutical raw materials HS code checks
564.17MB
Check
Logistics optimization by HS code
873.64MB
Check
How to secure competitive freight rates
557.25MB
Check
Trade data for industrial raw materials
182.32MB
Check
Customized market entry reports
185.53MB
Check
How to track global shipments
598.84MB
Check
Global trade resource libraries
818.14MB
Check
Processed grains HS code references
757.59MB
Check
How to identify correct HS codes
954.57MB
Check
Dynamic duty drawback calculations
159.26MB
Check
Shipping lane performance metrics
346.41MB
Check
Ceramic tiles HS code classification
965.55MB
Check
APAC trade flows by HS code
435.51MB
Check
How to optimize packaging with trade data
238.67MB
Check
International freight rate analysis
237.61MB
Check
Best global trade intelligence for SMEs
164.33MB
Check
Mineral ores HS code tariff details
219.13MB
Check
How to track global shipments
283.22MB
Check
Wool and yarn HS code verification
928.16MB
Check
US-China trade data comparisons
847.39MB
Check
How to scale export operations with data
794.62MB
Check
Scan to install
HS code-based container load planning to discover more
Netizen comments More
1101 Raw tobacco HS code tracking
2024-12-24 02:19 recommend
2326 WTO harmonization and HS codes
2024-12-24 01:38 recommend
366 Global trade data
2024-12-23 23:59 recommend
2941 Australia HS code tariff insights
2024-12-23 23:43 recommend
777 HS code-driven cross-border e-commerce
2024-12-23 23:39 recommend