1, no more than 8 tons, all parameters of the D30 engine: cylinder diameter 95mm, stroke 105 Mm, 4-cylinder in-line, 16-valve, double overhead camshaft, supercharged in-cooled, high-pressure common-rail fuel injection, torque 400N.m.
2. Four-five tons. Junling is the basic model of Jianghuai light truck, and it is also the backbone of JAC light truck, located in the medium and short-distance intercity logistics market. Jianghuai light truck is the core business of Jianghuai commercial vehicles, and it is also the cornerstone of the development and growth of Jianghuai Automobile.
3. OK. I drive the new MRT. The engine of Dewei D30 adopts a multi-sleed design, the rear axle speed ratio is 875, and the seats and configurations of the new MRT have been modified and optimized. According to reason, it can pull ten tons.
4. Seven hours. The d30 engine, the full name of Yunnedwei d30 engine, is mainly the introduction of German engine technology, which has a relatively high market share in light trucks. When a truck is planted with eight tons of cargo, it takes an average of 60 kilometers per hour, and it takes about seven hours to run 400 kilometers.
5. High-pressure common rail technology, super-long oil change, more worry-free and effort-saving. Yunnei's engine is famous in the small and medium-sized cylinder diesel engine industry. It is quite solid, anti-fabrication, and the quality can be said to be very good.The sales volume has risen steadily over the years, indicating that the market recognition is high. With 750 tires, it is not a big problem to pull five or six tons to run in the mountains.
6. This car has 0-liter displacement and 156 horsepower. The rear axle is wrapped in 5 tons. This design can pull up to about 10 tons, and the beam is a double-layer design, and the carrying power is barred. You can rest assured to pull 5 to 6 tons at ordinary times. Pulling 10 tons is the steel plate that needs to be strengthened.
TC is the English abbreviation of INTEC, Chinese name is "intelligent fuel-saving king", I is the English intercoole of intercooler R abbreviation. At present, there are two powers, GWM8TCI and GWM5TCI.
Four-cylinder b: Diesel engine 22: Total working volume (engine displacement, 2 liters) tci: It is the so-called turbocharger, (Turbo Charger with Inter-cooler exhaust gas turbocharger) The technology is average, many engine factories Everyone is producing this model of machine, such as Changchai, Yunnei, Hafei, etc.
TID--- It specifically refers to BYD's turbocharging, in-cylinder direct injection and dual clutch technology. TI---refers to turbocharged engines with an intercooler, which is generally divided into TSI and TCI. TSI turbocharged gasoline engine with intercooler TCI turbocharged diesel engine with intercooler.
1, GW5TCI is a high-pressure common-rail technology "intelligent fuel-saving" diesel engine jointly developed by Great Wall Company and Bosch of Germany, which has the advantages of saving, quietness, strength and so on. The power can reach 80kW, the torque is 300N·m, and the comprehensive fuel consumption per 100 kilometers is only 0L, which is the lowest fuel consumption among similar models, and the power of 5L reaches the fuel consumption of a 5L sedan.
2. The engine of the Great Wall Haval h3 diesel version is the 25TCI INTEC "Intelligent Fuel-saving King" electronically controlled high-pressure common rail supercharged medium-cooled diesel engine developed by Great Wall and Bosch of Germany. The engine displacement is 25L, the power is 80Kw3600rpm, and the torque is 300Nm180. Above 02400rpm, I hope to help you.
3. The TCI engine is a diesel engine jointly developed by Great Wall Automobile and Bosch of Germany, which adopts electronically controlled high-voltage common rail technology and is equipped with an intercooler. TC is the English abbreviation of INTEC. The Chinese name is "Intelligent Fuel-saving King", and I is the English abbreviation of intercooler of intercooler. At present, there are two powers, GWM8TCI and GWM5TCI.
4, x0dx0The ax0dx0aTCI engine is a diesel engine jointly developed by Great Wall Automobile and Bosch of Germany, which adopts electronically controlled high-voltage common rail technology and is equipped with an intercooler. TC is the English abbreviation of INTEC. The Chinese name is "Intelligent Fuel-saving King", and I is the English abbreviation of intercooler for intercooler.
5. What engine does Infiniti g 25 use? Infiniti g25 uses a 5-liter v6 naturally aspirated engine. Infiniti G (check the transaction price | detailed explanation of the model) 25 is a medium-sized sedan under Infiniti. The wheelbase of this car is 2850mm, and the length, width and height are 4780mm, 1773mm and 1453mm respectively.
6. Finiti g25 uses a 5-liter v6 naturally aspirated engine.Finiti g25 is a medium-sized car under Finiti in the United Kingdom. Its wheelbase is 2850 mm, and the length, width and height are 4780 mm, 1773 mm and 1453 mm respectively. The Finiti g25 adopts a 5-liter naturally aspirated engine with a maximum torque of 235 horsepower and 253 Nm.
TSI stands for the abbreviation of the first letter of the word TwinchargerFuelStratifiedInjection, which can be understood as double supercharged + layered combustion + injection through the surface meaning of the letters.TSI is a highly efficient engine form, which will be the perfect unity of power and fuel economy.
TSI refers to double-charged turbine and mechanical supercharged layered injection technology, TFSI refers to fuel layered injection, TFSI turbocharged fuel layered injection engine, and this T, which is more than FSI, represents turbocharging.
D: In fact, it is DCT, that is, Dual clutch Transmission, that is, dual clutch transmission, that is, the vehicle volume adopts a dual clutch gearbox. Therefore, TID is a vehicle that adopts a turbocharged in-cylinder direct injection engine and a dual-clutch gearbox.
However, TSI adopts FSI technology, that is, injecting fuel into the cylinder through a high-pressure fuel pump, which is a method of indirect injection compared with direct injection engines.The most prominent feature of this engine is its strong horsepower and excellent economy when traveling at high speed.
1, TID--- specifically refers to turbocharging, in-cylinder direct injection, dual clutch technology. TI---refers to turbocharged engines with an intercooler, which is generally divided into TSI and TCI. TSI turbocharged gasoline engine with intercooler TCI turbocharged diesel engine with intercooler.
2. Automobile turbocharged engines with displacement can improve power and torque under the same displacement, and will not increase too much fuel consumption. The power of a car determines how fast it can run, and the torque determines how much it can carry and how fast it can accelerate.
3. In terms of the price of the whole machine, 5TCI has advantages, and the technology is also very mature. The maximum torque of 0T is larger than that of 5TCI, reaching more than 300 Nm. In addition, the Great Wall launched the 0T engine as an effort for the new emission standards.
4. TSI is the initials of the three key features of Turbo-charging, Super-charging and Injection.
5. The G6 we tested this time is equipped with the same 0TCI engine as the G5. Although the data is not as amazing as the latest in-cylinder direct injection 0TGDI, the maximum power of this 0TCI engine is 125kW@5500rpm, the maximum torque is 235Nm@1900rpm, and it is equipped with timing variable technology, and the book data is also good.
6. Of course, the new 0T engine is better. Compared with the old model, the displacement is smaller, the power and torque have been greatly improved, but the fuel consumption has decreased. The old 5TCI engine is equipped on H3H5, and the new model is now only configured on the new H5.
Four-cylinder engine. According to the official website of Pacific Automobile, the Jianghuai Ruifeng s5 engine model is a four-cylinder turbocharged engine, matched with a six-speed manual transmission and a six-speed dual-clutch transmission, with a maximum speed of 190km/h.
The brand's engine is an in-line three-cylinder engine. 2The 015 Chevrolet Chuangku uses two engines, one is a 0-liter turbocharged engine and the other is a 3-liter turbocharged engine. Both 0T and 3T turbocharged engines are in-line three-cylinder structures.
The Yinglang is a three-cylinder engine. The Yinglang is equipped with two engines, one is a 10-liter turbocharged engine, and the other is a 13-liter turbocharged engine. The Buick Enlang 15T model is equipped with a 10T in-line 3-cylinder turbocharged engine, matching two transmissions: 6-speed manual or 6-speed dual clutch. Box, maximum power 92KW, maximum torque.
Cars with T mean that the engine is turbocharged, and L means that the engine is a naturally aspirated engine.
As of September 11, 2021, Chevrolet models on sale are three-cylinder engines.The 535T model of the Merrybo XL is equipped with a 13T in-line 3-cylinder turbocharged engine, matched with a CVT stepless gearbox, with a maximum power of 121KW and a maximum torque of 240N·m. The 325T335T model is equipped with 10T.
BMW 320li engine parameters are equipped with a 20t turbocharged engine, the model is b48b20d, the maximum power is 115kw, the peak torque is 250nm, the cylinder arrangement is in series, the number of cylinders is 4, and the gas distribution mechanism is dohc with 2021 Take the Ma 320li as an example, which is a medium-sized car with a body size of 4719mm long.
HS code indexing for procurement catalogs-APP, download it now, new users will receive a novice gift pack.
1, no more than 8 tons, all parameters of the D30 engine: cylinder diameter 95mm, stroke 105 Mm, 4-cylinder in-line, 16-valve, double overhead camshaft, supercharged in-cooled, high-pressure common-rail fuel injection, torque 400N.m.
2. Four-five tons. Junling is the basic model of Jianghuai light truck, and it is also the backbone of JAC light truck, located in the medium and short-distance intercity logistics market. Jianghuai light truck is the core business of Jianghuai commercial vehicles, and it is also the cornerstone of the development and growth of Jianghuai Automobile.
3. OK. I drive the new MRT. The engine of Dewei D30 adopts a multi-sleed design, the rear axle speed ratio is 875, and the seats and configurations of the new MRT have been modified and optimized. According to reason, it can pull ten tons.
4. Seven hours. The d30 engine, the full name of Yunnedwei d30 engine, is mainly the introduction of German engine technology, which has a relatively high market share in light trucks. When a truck is planted with eight tons of cargo, it takes an average of 60 kilometers per hour, and it takes about seven hours to run 400 kilometers.
5. High-pressure common rail technology, super-long oil change, more worry-free and effort-saving. Yunnei's engine is famous in the small and medium-sized cylinder diesel engine industry. It is quite solid, anti-fabrication, and the quality can be said to be very good.The sales volume has risen steadily over the years, indicating that the market recognition is high. With 750 tires, it is not a big problem to pull five or six tons to run in the mountains.
6. This car has 0-liter displacement and 156 horsepower. The rear axle is wrapped in 5 tons. This design can pull up to about 10 tons, and the beam is a double-layer design, and the carrying power is barred. You can rest assured to pull 5 to 6 tons at ordinary times. Pulling 10 tons is the steel plate that needs to be strengthened.
TC is the English abbreviation of INTEC, Chinese name is "intelligent fuel-saving king", I is the English intercoole of intercooler R abbreviation. At present, there are two powers, GWM8TCI and GWM5TCI.
Four-cylinder b: Diesel engine 22: Total working volume (engine displacement, 2 liters) tci: It is the so-called turbocharger, (Turbo Charger with Inter-cooler exhaust gas turbocharger) The technology is average, many engine factories Everyone is producing this model of machine, such as Changchai, Yunnei, Hafei, etc.
TID--- It specifically refers to BYD's turbocharging, in-cylinder direct injection and dual clutch technology. TI---refers to turbocharged engines with an intercooler, which is generally divided into TSI and TCI. TSI turbocharged gasoline engine with intercooler TCI turbocharged diesel engine with intercooler.
1, GW5TCI is a high-pressure common-rail technology "intelligent fuel-saving" diesel engine jointly developed by Great Wall Company and Bosch of Germany, which has the advantages of saving, quietness, strength and so on. The power can reach 80kW, the torque is 300N·m, and the comprehensive fuel consumption per 100 kilometers is only 0L, which is the lowest fuel consumption among similar models, and the power of 5L reaches the fuel consumption of a 5L sedan.
2. The engine of the Great Wall Haval h3 diesel version is the 25TCI INTEC "Intelligent Fuel-saving King" electronically controlled high-pressure common rail supercharged medium-cooled diesel engine developed by Great Wall and Bosch of Germany. The engine displacement is 25L, the power is 80Kw3600rpm, and the torque is 300Nm180. Above 02400rpm, I hope to help you.
3. The TCI engine is a diesel engine jointly developed by Great Wall Automobile and Bosch of Germany, which adopts electronically controlled high-voltage common rail technology and is equipped with an intercooler. TC is the English abbreviation of INTEC. The Chinese name is "Intelligent Fuel-saving King", and I is the English abbreviation of intercooler of intercooler. At present, there are two powers, GWM8TCI and GWM5TCI.
4, x0dx0The ax0dx0aTCI engine is a diesel engine jointly developed by Great Wall Automobile and Bosch of Germany, which adopts electronically controlled high-voltage common rail technology and is equipped with an intercooler. TC is the English abbreviation of INTEC. The Chinese name is "Intelligent Fuel-saving King", and I is the English abbreviation of intercooler for intercooler.
5. What engine does Infiniti g 25 use? Infiniti g25 uses a 5-liter v6 naturally aspirated engine. Infiniti G (check the transaction price | detailed explanation of the model) 25 is a medium-sized sedan under Infiniti. The wheelbase of this car is 2850mm, and the length, width and height are 4780mm, 1773mm and 1453mm respectively.
6. Finiti g25 uses a 5-liter v6 naturally aspirated engine.Finiti g25 is a medium-sized car under Finiti in the United Kingdom. Its wheelbase is 2850 mm, and the length, width and height are 4780 mm, 1773 mm and 1453 mm respectively. The Finiti g25 adopts a 5-liter naturally aspirated engine with a maximum torque of 235 horsepower and 253 Nm.
TSI stands for the abbreviation of the first letter of the word TwinchargerFuelStratifiedInjection, which can be understood as double supercharged + layered combustion + injection through the surface meaning of the letters.TSI is a highly efficient engine form, which will be the perfect unity of power and fuel economy.
TSI refers to double-charged turbine and mechanical supercharged layered injection technology, TFSI refers to fuel layered injection, TFSI turbocharged fuel layered injection engine, and this T, which is more than FSI, represents turbocharging.
D: In fact, it is DCT, that is, Dual clutch Transmission, that is, dual clutch transmission, that is, the vehicle volume adopts a dual clutch gearbox. Therefore, TID is a vehicle that adopts a turbocharged in-cylinder direct injection engine and a dual-clutch gearbox.
However, TSI adopts FSI technology, that is, injecting fuel into the cylinder through a high-pressure fuel pump, which is a method of indirect injection compared with direct injection engines.The most prominent feature of this engine is its strong horsepower and excellent economy when traveling at high speed.
1, TID--- specifically refers to turbocharging, in-cylinder direct injection, dual clutch technology. TI---refers to turbocharged engines with an intercooler, which is generally divided into TSI and TCI. TSI turbocharged gasoline engine with intercooler TCI turbocharged diesel engine with intercooler.
2. Automobile turbocharged engines with displacement can improve power and torque under the same displacement, and will not increase too much fuel consumption. The power of a car determines how fast it can run, and the torque determines how much it can carry and how fast it can accelerate.
3. In terms of the price of the whole machine, 5TCI has advantages, and the technology is also very mature. The maximum torque of 0T is larger than that of 5TCI, reaching more than 300 Nm. In addition, the Great Wall launched the 0T engine as an effort for the new emission standards.
4. TSI is the initials of the three key features of Turbo-charging, Super-charging and Injection.
5. The G6 we tested this time is equipped with the same 0TCI engine as the G5. Although the data is not as amazing as the latest in-cylinder direct injection 0TGDI, the maximum power of this 0TCI engine is 125kW@5500rpm, the maximum torque is 235Nm@1900rpm, and it is equipped with timing variable technology, and the book data is also good.
6. Of course, the new 0T engine is better. Compared with the old model, the displacement is smaller, the power and torque have been greatly improved, but the fuel consumption has decreased. The old 5TCI engine is equipped on H3H5, and the new model is now only configured on the new H5.
Four-cylinder engine. According to the official website of Pacific Automobile, the Jianghuai Ruifeng s5 engine model is a four-cylinder turbocharged engine, matched with a six-speed manual transmission and a six-speed dual-clutch transmission, with a maximum speed of 190km/h.
The brand's engine is an in-line three-cylinder engine. 2The 015 Chevrolet Chuangku uses two engines, one is a 0-liter turbocharged engine and the other is a 3-liter turbocharged engine. Both 0T and 3T turbocharged engines are in-line three-cylinder structures.
The Yinglang is a three-cylinder engine. The Yinglang is equipped with two engines, one is a 10-liter turbocharged engine, and the other is a 13-liter turbocharged engine. The Buick Enlang 15T model is equipped with a 10T in-line 3-cylinder turbocharged engine, matching two transmissions: 6-speed manual or 6-speed dual clutch. Box, maximum power 92KW, maximum torque.
Cars with T mean that the engine is turbocharged, and L means that the engine is a naturally aspirated engine.
As of September 11, 2021, Chevrolet models on sale are three-cylinder engines.The 535T model of the Merrybo XL is equipped with a 13T in-line 3-cylinder turbocharged engine, matched with a CVT stepless gearbox, with a maximum power of 121KW and a maximum torque of 240N·m. The 325T335T model is equipped with 10T.
BMW 320li engine parameters are equipped with a 20t turbocharged engine, the model is b48b20d, the maximum power is 115kw, the peak torque is 250nm, the cylinder arrangement is in series, the number of cylinders is 4, and the gas distribution mechanism is dohc with 2021 Take the Ma 320li as an example, which is a medium-sized car with a body size of 4719mm long.
Dairy sector HS code forecasting
author: 2024-12-24 02:36HS code-based customs dispute resolution
author: 2024-12-24 01:21Organic chemicals (HS code ) patterns
author: 2024-12-24 00:56International trade law reference data
author: 2024-12-24 00:53HS code trends in textiles and apparel
author: 2024-12-24 01:56How to integrate trade data into workflows
author: 2024-12-24 01:30Global trade duty recovery strategies
author: 2024-12-24 01:26257.62MB
Check546.98MB
Check878.93MB
Check683.42MB
Check472.71MB
Check237.95MB
Check595.44MB
Check151.51MB
Check673.56MB
Check524.14MB
Check927.27MB
Check648.66MB
Check814.33MB
Check198.84MB
Check255.82MB
Check497.67MB
Check928.13MB
Check766.42MB
Check755.47MB
Check632.26MB
Check738.83MB
Check862.37MB
Check915.45MB
Check964.83MB
Check291.62MB
Check245.38MB
Check923.77MB
Check581.18MB
Check486.73MB
Check875.15MB
Check892.15MB
Check826.65MB
Check975.26MB
Check246.45MB
Check828.88MB
Check532.36MB
CheckScan to install
HS code indexing for procurement catalogs to discover more
Netizen comments More
351 Exotic wood imports HS code references
2024-12-24 02:46 recommend
1213 How to map complex products to HS codes
2024-12-24 01:41 recommend
1176 Processed foods HS code mapping
2024-12-24 00:46 recommend
2712 HS code-based tariff reconciliation
2024-12-24 00:25 recommend
1047 HS code-driven cost-benefit analyses
2024-12-24 00:19 recommend