1. The gas generator of the car airbag is nitrogen, and nitrogen will inflate the airbag within 0.1 seconds. There are substances such as sodium azide (NaN3) or ammonium nitrate (NH4NO3) in car airbags. When a car is hit violently at high speed, these substances will decompose quickly, producing a large amount of gas and filling the airbag.
2. The airbag gas generator is a device located in the airbag.Airbags are equipped with gas generators of different specifications. In the event of a vehicle collision, the gas generator inflates the airbag and unfolds it to protect the safety of passengers.
3. The airbag gas generator refers to a device that expands the airbag to protect the occupan before the occupan has a second collision in the event of a collision. The airbag, as an auxiliary device for the occupant restraint device in the seat, is called the Airbag Gas Generator System (SupplementalRestraintSystem, SRS).
4. The automobile airbag system is composed of collision sensor, control module (ECU), gas generator and airbag, etc. Airbag sensor: generally also known as collision sensor. According to different uses, collision sensors are divided into trigger collision sensors and protective collision sensors.
5. The working principle of the car airbag generator. The driver's airbag is stored in the steering wheel gasket. Therefore, when you see the words SRS or Airbag marked on the steering wheel, you can know that the car is equipped with airbags.
6. At present, gas generators mainly include compressed gas, fireworks and mixed gas. Airbag: It is generally made of polyamide fabric with good crack resistance, which is a semi-hard polymer material that can withstand greater pressure. After vulcanization, it can reduce the impact of airbag expansion.
Generally, this should be the left side airbag plug Caused by poor contact.It is recommended that you unplug the plug and plug it in, and use the decoder to clear the fault code. If it really doesn't work, you need to check the fault of the line.
The reason for the broken circuit or increased resistance of the Accord car airbag gas generator is: the situation caused by poor contact of the airbag plug.
If the generator is broken, then the pin of the generator is broken! If the whole circuit is broken or the resistance increases a lot, it is possible that there is a problem with the connector or the clock spring.
In this case, there are three possibilities: first, the airbag control unit fails, and it is possible to set any fault code. However, if the gas control unit is not submerged or disassembled, the chance of damage is very small.
If there is a problem with the main airbag or oil wire, it is recommended to find a professional to help you overhaul it.The car on Hongmei South Road in Minhang with Long 13-11 can be done. The places with AIR BAG on the car are all airbags.
There is a problem with one of the plugs of the main airbag or oil wire. The airbag computer board is generally in front of the gear lever or below the gear lever. The place with the AIR BAG in the car is the airbag.
1. Also, remember not to drive during drinking, and at the same time, you should correctly handle drunk driving, especially when the alcohol content is high or drunk or drunk. Don't drive the vehicle.
2. With the development of the automobile industry, airbags have almost become the standard for cars of various automobile manufacturers in recent years.It is equipped, but for this life-threatening widget, car owners seem to pay less attention to it.
3. Then the sitting posture. Generally speaking, drivers should not lean forward when driving. The sitting posture should be close to the seat, and the back seat should be adjusted to be able to control the car comfortably, so that there will be enough space for the airbag to fully play its protective role in the event of an accident.
4. Airbags are personal protection and safety technical measures. The airbag system is a passive safety protection system. When used with seat belts, it can provide effective collision protection for passengers. When a car collides, the car airbag can reduce the head injury rate by 25% and the facial injury rate by about 80%.
5. First of all, we should not knock or hit the part where the airbag is located at any time.
There are three types of airbag gas generators, which are divided into compressed gas type, pyrotic type and mixed type. They are made of polyphthalicamide fabric with good crack resistance. They are semi-hard polymer materials and can withstand great pressure.An airbag refers to a device that expands the airbag to protect the occupant in the event of a collision before the occupant has a second collision.
"Help" gas generator Some gas storage generators are combined with one or more igniters equipped with small gas pylerytors. The device heats the gas delivered to the gas generator and relies on the heating to increase the pressure of the gas in the airbag.
The automotive airbag system consists of a collision sensor, a control module (ECU), a gas generator and an airbag: 1. Airbag sensor: usually also called collision sensor. According to different uses, collision sensors are divided into trigger collision sensors and protective collision sensors.
At present, there are three main types of gas generators: compressed gas, fireworks and hybrid. Airbag: It is generally made of polyamide fabric with good anti-cracking performance. It is a semi-hard polymer material that can withstand greater pressure;After vulcanization, it can reduce the impact force when the airbag expands.
The safety performance of cars is for different protection purposes. There are many types, generally including side airbags, head airbags and knee airbags. There are very big differences between these three types.
Nitrogen. The gas generator of the car airbag is nitrogen, which will inflate the airbag in 0.1 seconds. An airbag is an elastic capsule, a medium filled with compressed air or water in a flexible rubber capsule.
How to interpret global trade indices-APP, download it now, new users will receive a novice gift pack.
1. The gas generator of the car airbag is nitrogen, and nitrogen will inflate the airbag within 0.1 seconds. There are substances such as sodium azide (NaN3) or ammonium nitrate (NH4NO3) in car airbags. When a car is hit violently at high speed, these substances will decompose quickly, producing a large amount of gas and filling the airbag.
2. The airbag gas generator is a device located in the airbag.Airbags are equipped with gas generators of different specifications. In the event of a vehicle collision, the gas generator inflates the airbag and unfolds it to protect the safety of passengers.
3. The airbag gas generator refers to a device that expands the airbag to protect the occupan before the occupan has a second collision in the event of a collision. The airbag, as an auxiliary device for the occupant restraint device in the seat, is called the Airbag Gas Generator System (SupplementalRestraintSystem, SRS).
4. The automobile airbag system is composed of collision sensor, control module (ECU), gas generator and airbag, etc. Airbag sensor: generally also known as collision sensor. According to different uses, collision sensors are divided into trigger collision sensors and protective collision sensors.
5. The working principle of the car airbag generator. The driver's airbag is stored in the steering wheel gasket. Therefore, when you see the words SRS or Airbag marked on the steering wheel, you can know that the car is equipped with airbags.
6. At present, gas generators mainly include compressed gas, fireworks and mixed gas. Airbag: It is generally made of polyamide fabric with good crack resistance, which is a semi-hard polymer material that can withstand greater pressure. After vulcanization, it can reduce the impact of airbag expansion.
Generally, this should be the left side airbag plug Caused by poor contact.It is recommended that you unplug the plug and plug it in, and use the decoder to clear the fault code. If it really doesn't work, you need to check the fault of the line.
The reason for the broken circuit or increased resistance of the Accord car airbag gas generator is: the situation caused by poor contact of the airbag plug.
If the generator is broken, then the pin of the generator is broken! If the whole circuit is broken or the resistance increases a lot, it is possible that there is a problem with the connector or the clock spring.
In this case, there are three possibilities: first, the airbag control unit fails, and it is possible to set any fault code. However, if the gas control unit is not submerged or disassembled, the chance of damage is very small.
If there is a problem with the main airbag or oil wire, it is recommended to find a professional to help you overhaul it.The car on Hongmei South Road in Minhang with Long 13-11 can be done. The places with AIR BAG on the car are all airbags.
There is a problem with one of the plugs of the main airbag or oil wire. The airbag computer board is generally in front of the gear lever or below the gear lever. The place with the AIR BAG in the car is the airbag.
1. Also, remember not to drive during drinking, and at the same time, you should correctly handle drunk driving, especially when the alcohol content is high or drunk or drunk. Don't drive the vehicle.
2. With the development of the automobile industry, airbags have almost become the standard for cars of various automobile manufacturers in recent years.It is equipped, but for this life-threatening widget, car owners seem to pay less attention to it.
3. Then the sitting posture. Generally speaking, drivers should not lean forward when driving. The sitting posture should be close to the seat, and the back seat should be adjusted to be able to control the car comfortably, so that there will be enough space for the airbag to fully play its protective role in the event of an accident.
4. Airbags are personal protection and safety technical measures. The airbag system is a passive safety protection system. When used with seat belts, it can provide effective collision protection for passengers. When a car collides, the car airbag can reduce the head injury rate by 25% and the facial injury rate by about 80%.
5. First of all, we should not knock or hit the part where the airbag is located at any time.
There are three types of airbag gas generators, which are divided into compressed gas type, pyrotic type and mixed type. They are made of polyphthalicamide fabric with good crack resistance. They are semi-hard polymer materials and can withstand great pressure.An airbag refers to a device that expands the airbag to protect the occupant in the event of a collision before the occupant has a second collision.
"Help" gas generator Some gas storage generators are combined with one or more igniters equipped with small gas pylerytors. The device heats the gas delivered to the gas generator and relies on the heating to increase the pressure of the gas in the airbag.
The automotive airbag system consists of a collision sensor, a control module (ECU), a gas generator and an airbag: 1. Airbag sensor: usually also called collision sensor. According to different uses, collision sensors are divided into trigger collision sensors and protective collision sensors.
At present, there are three main types of gas generators: compressed gas, fireworks and hybrid. Airbag: It is generally made of polyamide fabric with good anti-cracking performance. It is a semi-hard polymer material that can withstand greater pressure;After vulcanization, it can reduce the impact force when the airbag expands.
The safety performance of cars is for different protection purposes. There are many types, generally including side airbags, head airbags and knee airbags. There are very big differences between these three types.
Nitrogen. The gas generator of the car airbag is nitrogen, which will inflate the airbag in 0.1 seconds. An airbag is an elastic capsule, a medium filled with compressed air or water in a flexible rubber capsule.
Trade compliance tools for exporters
author: 2024-12-24 03:03HS code compliance for customs
author: 2024-12-24 02:55Granular HS code detail for compliance officers
author: 2024-12-24 02:47Comparing duty rates across markets
author: 2024-12-24 02:06Value-added exports by HS code
author: 2024-12-24 01:38Dairy powder HS code references
author: 2024-12-24 03:22Nutraceuticals HS code verification
author: 2024-12-24 02:18How to optimize packaging with trade data
author: 2024-12-24 01:50Trade analytics for risk mitigation
author: 2024-12-24 01:40Advanced import export metric tracking
author: 2024-12-24 01:21389.48MB
Check942.84MB
Check592.78MB
Check374.78MB
Check798.38MB
Check928.61MB
Check878.31MB
Check851.96MB
Check124.78MB
Check623.44MB
Check624.65MB
Check396.21MB
Check949.92MB
Check847.11MB
Check758.52MB
Check291.82MB
Check235.21MB
Check486.66MB
Check848.29MB
Check283.92MB
Check773.21MB
Check112.84MB
Check639.33MB
Check177.88MB
Check247.61MB
Check356.58MB
Check386.38MB
Check145.21MB
Check927.56MB
Check891.66MB
Check372.91MB
Check782.46MB
Check211.41MB
Check451.14MB
Check526.76MB
Check883.46MB
CheckScan to install
How to interpret global trade indices to discover more
Netizen comments More
1029 trade data analysis
2024-12-24 03:30 recommend
2369 HS code-driven route-to-market planning
2024-12-24 02:36 recommend
2542 International trade compliance workflow
2024-12-24 02:29 recommend
2914 Identifying duty exemptions via HS code
2024-12-24 02:07 recommend
2107 Bulk grain HS code insights
2024-12-24 02:02 recommend