1, the gap between Atz 0 and 5 is mainly reflected in the power. Due to the different power, the driving experience must be different. However, about the driving experience, the owner still needs to go to the local 4S store for a test drive to know.
2. This depends on the personal situation of the owner. The ATZ 5 model is more powerful than the 0 model, and the price of the car will be higher.
3. According to the data measured by the online media, the 100-kilometer acceleration time of the 0-liter version of Atz is 6 seconds. Judging from the actual measured data of some car owners, Atz accelerates to 100 kilometers from 0 to about 9 seconds. Depending on the condition of the vehicle and the road environment, the acceleration time of 100 kilometers will also vary.
4. The acceleration time of ATZ 0 version to 100 kilometers is 6 seconds. This car is equipped with the Mazda Sky Blue Sky engine. The exhaust manifold can significantly improve the low-torque output, which has an innate advantage in low-torque performance.
1, PY is the abreviation of PY-VPS, representing SKYAC TIV-G 5-liter engine. PE stands for PE-VPS, which stands for the SKYACTIV-G 0-liter engine. PY150 engine: belongs to the low-speed engine, with excellent performance in medium and low speeds.
2. PY should be the abbreviated of PY-VPS, representing the SKYACTIV-G 5-liter engine. PE SHOULD BE THE ABBREVIATION OF PE-VPS, REPRESENTING SKYACTIV-G 0-LITER ENGINE.
3. The advantage is that it is fuel-saving and the torque ratio is large. The disadvantage is that the torque of the middle segment is insufficient.Mazda's pe is a high-speed engine. The advantages are fuel-saving and the power-to-rise ratio are large. The disadvantage is that the mid-speed torque is insufficient.
The engine model of Mazda cx5 is PE, which is a Skyactic Chuangchi Blue Sky engine. The power output is linear, the initial segment is sensitive, and the middle and the rear section is smooth. Mazda cx 5 Equipped with two naturally aspirated engines of 20L25L, the maximum horsepower is 155ps196ps, and the maximum power is 114kw144kw respectively, matched with 6 gears.
The maximum power of Mazda 5's 0-liter naturally aspirated engine is 114 kilowatts, and the maximum torque is 200 Nm. The maximum power of the 5-liter naturally aspirated engine is 144kw, and the maximum torque is 252Nm.The maximum power speed of Mazda's 5-liter naturally aspirated engine is 6100 rpm, and the maximum torque speed is 4000 rpm.
Carring model: CX-Anxelera, Atz Technical parameters: up to high power 110kw/6000rpm, maximum torque speed 200.0Nm/4000rpm This set of 0L self-aspirated engine 6AT automobile power system can be called an old classmate, in the horse Many of Da Automobile's own models are full of their shadows.
In terms of power, Mazda CX-5 has two sets of power systems to choose from, 5L naturally aspirated engine, maximum horsepower 196Ps, maximum torque 252N·m, 0L naturally aspirated engine with maximum horsepower 155Ps, maximum torque 200N·m, both of which match 6 gears. Manual automatic integrated transmission.
The engine model of Mazda cx-5 is PE, which is the Skyactic Blue Sky engine. The power output is linear, the initial segment is sensitive, and the middle and rear segments are smooth.
PE is a SKYACTIV-G 0-liter engine, not imported, produced and assembled in China, but the application technology belongs to Mazda itself. The difference between domestic engines and imported engines is different in technology. Foreign engines are more advanced than Chinese engines, such as technology on exhaust ducts. Refer to foreign designs at home or directly invite foreign designs.
PE is a SKYACTIV-G0-liter engine. It is not imported, but assembled from domestic production, but in terms of applied technology, it is Mazda's own exclusive technology.
It is a PESKYACTIV-G0-liter naturally aspirated engine, which is not imported, but produced and assembled in China. However, the application technology belongs to Mazda itself, and it is basically equipped with Mazda Chuangchi Blue Sky technology.
Engines and gearboxes can be said to be imported. Due to the vast majority of key parts, China's production temporarily does not meet the precision regulations, such as engine crankshafts, crankshafts, piston rods, fuel injectors, automobile spark plugs, gearbox torque converters and other key products are imported, and a small parts are installed in China. The chassis is domestic.
PE engine is an internal combustion engine that uses the reciprocating movement of the piston to generate power, rather than the rotation of the rotor in the rotor engine to generate power. The PE engine was developed by Peugeot of France and is mainly used in vehicles such as automobiles and light commercial vehicles.
py OK. PE engine: the full name is ZRPE, which is an engine produced by Mazda between 2001 and 2009. It adopts DOHC valve structure and variable intake temperature system, with a maximum power of 110Kw to 6500rpm and a maximum torque of 184Nm to 4000rpm, which is more fuel economy.
1. Powerful: The PE engine has a maximum power of 116kW and a maximum torque of 202 Nm. Mazda models equipped with this engine show good power output during acceleration and driving. Good fuel economy: The PE engine adopts aluminum alloy cylinder head and cylinder block is equipped with in-cylinder direct injection technology.
2. Mazda py is good. PE engine: the full name is "ZR-PE", which is an engine produced by Mazda between 2001 and 2009. It adopts DOHC valve structure and variable intake temperature system, with a maximum power of 110Kw/6500rpm and a maximum torque of 184Nm/4000rpm, which is fuel economy.
3. The advantage is that it is fuel-saving and the torque ratio is large. The disadvantage is that the torque of the middle segment is insufficient. Mazda's pe is a high-speed engine. The advantages are fuel-saving and the power-to-rise ratio are large. The disadvantage is that the mid-speed torque is insufficient.
4. The engine model of Mazda cx5 is PE, which is Skyactic Chuangchi Blue Sky engine. The power output is linear, the initial segment is sensitive, and the middle and rear section is smooth.Mazda cx5 is equipped with two naturally aspirated engines of 20L25L, with a maximum horsepower of 155ps196ps and a maximum power of 114kw144kw respectively, matching 6 gears.
5, p5 refers to the 5-liter naturally aspirated engine, and pe refers to the 0-liter naturally aspirated engine. Both engines are equipped with Mazda's Chuangchi Blue Sky technology. The Mazda model with a 5-liter naturally aspirated engine is the Anxera.
Real-time commodity flow tracking-APP, download it now, new users will receive a novice gift pack.
1, the gap between Atz 0 and 5 is mainly reflected in the power. Due to the different power, the driving experience must be different. However, about the driving experience, the owner still needs to go to the local 4S store for a test drive to know.
2. This depends on the personal situation of the owner. The ATZ 5 model is more powerful than the 0 model, and the price of the car will be higher.
3. According to the data measured by the online media, the 100-kilometer acceleration time of the 0-liter version of Atz is 6 seconds. Judging from the actual measured data of some car owners, Atz accelerates to 100 kilometers from 0 to about 9 seconds. Depending on the condition of the vehicle and the road environment, the acceleration time of 100 kilometers will also vary.
4. The acceleration time of ATZ 0 version to 100 kilometers is 6 seconds. This car is equipped with the Mazda Sky Blue Sky engine. The exhaust manifold can significantly improve the low-torque output, which has an innate advantage in low-torque performance.
1, PY is the abreviation of PY-VPS, representing SKYAC TIV-G 5-liter engine. PE stands for PE-VPS, which stands for the SKYACTIV-G 0-liter engine. PY150 engine: belongs to the low-speed engine, with excellent performance in medium and low speeds.
2. PY should be the abbreviated of PY-VPS, representing the SKYACTIV-G 5-liter engine. PE SHOULD BE THE ABBREVIATION OF PE-VPS, REPRESENTING SKYACTIV-G 0-LITER ENGINE.
3. The advantage is that it is fuel-saving and the torque ratio is large. The disadvantage is that the torque of the middle segment is insufficient.Mazda's pe is a high-speed engine. The advantages are fuel-saving and the power-to-rise ratio are large. The disadvantage is that the mid-speed torque is insufficient.
The engine model of Mazda cx5 is PE, which is a Skyactic Chuangchi Blue Sky engine. The power output is linear, the initial segment is sensitive, and the middle and the rear section is smooth. Mazda cx 5 Equipped with two naturally aspirated engines of 20L25L, the maximum horsepower is 155ps196ps, and the maximum power is 114kw144kw respectively, matched with 6 gears.
The maximum power of Mazda 5's 0-liter naturally aspirated engine is 114 kilowatts, and the maximum torque is 200 Nm. The maximum power of the 5-liter naturally aspirated engine is 144kw, and the maximum torque is 252Nm.The maximum power speed of Mazda's 5-liter naturally aspirated engine is 6100 rpm, and the maximum torque speed is 4000 rpm.
Carring model: CX-Anxelera, Atz Technical parameters: up to high power 110kw/6000rpm, maximum torque speed 200.0Nm/4000rpm This set of 0L self-aspirated engine 6AT automobile power system can be called an old classmate, in the horse Many of Da Automobile's own models are full of their shadows.
In terms of power, Mazda CX-5 has two sets of power systems to choose from, 5L naturally aspirated engine, maximum horsepower 196Ps, maximum torque 252N·m, 0L naturally aspirated engine with maximum horsepower 155Ps, maximum torque 200N·m, both of which match 6 gears. Manual automatic integrated transmission.
The engine model of Mazda cx-5 is PE, which is the Skyactic Blue Sky engine. The power output is linear, the initial segment is sensitive, and the middle and rear segments are smooth.
PE is a SKYACTIV-G 0-liter engine, not imported, produced and assembled in China, but the application technology belongs to Mazda itself. The difference between domestic engines and imported engines is different in technology. Foreign engines are more advanced than Chinese engines, such as technology on exhaust ducts. Refer to foreign designs at home or directly invite foreign designs.
PE is a SKYACTIV-G0-liter engine. It is not imported, but assembled from domestic production, but in terms of applied technology, it is Mazda's own exclusive technology.
It is a PESKYACTIV-G0-liter naturally aspirated engine, which is not imported, but produced and assembled in China. However, the application technology belongs to Mazda itself, and it is basically equipped with Mazda Chuangchi Blue Sky technology.
Engines and gearboxes can be said to be imported. Due to the vast majority of key parts, China's production temporarily does not meet the precision regulations, such as engine crankshafts, crankshafts, piston rods, fuel injectors, automobile spark plugs, gearbox torque converters and other key products are imported, and a small parts are installed in China. The chassis is domestic.
PE engine is an internal combustion engine that uses the reciprocating movement of the piston to generate power, rather than the rotation of the rotor in the rotor engine to generate power. The PE engine was developed by Peugeot of France and is mainly used in vehicles such as automobiles and light commercial vehicles.
py OK. PE engine: the full name is ZRPE, which is an engine produced by Mazda between 2001 and 2009. It adopts DOHC valve structure and variable intake temperature system, with a maximum power of 110Kw to 6500rpm and a maximum torque of 184Nm to 4000rpm, which is more fuel economy.
1. Powerful: The PE engine has a maximum power of 116kW and a maximum torque of 202 Nm. Mazda models equipped with this engine show good power output during acceleration and driving. Good fuel economy: The PE engine adopts aluminum alloy cylinder head and cylinder block is equipped with in-cylinder direct injection technology.
2. Mazda py is good. PE engine: the full name is "ZR-PE", which is an engine produced by Mazda between 2001 and 2009. It adopts DOHC valve structure and variable intake temperature system, with a maximum power of 110Kw/6500rpm and a maximum torque of 184Nm/4000rpm, which is fuel economy.
3. The advantage is that it is fuel-saving and the torque ratio is large. The disadvantage is that the torque of the middle segment is insufficient. Mazda's pe is a high-speed engine. The advantages are fuel-saving and the power-to-rise ratio are large. The disadvantage is that the mid-speed torque is insufficient.
4. The engine model of Mazda cx5 is PE, which is Skyactic Chuangchi Blue Sky engine. The power output is linear, the initial segment is sensitive, and the middle and rear section is smooth.Mazda cx5 is equipped with two naturally aspirated engines of 20L25L, with a maximum horsepower of 155ps196ps and a maximum power of 114kw144kw respectively, matching 6 gears.
5, p5 refers to the 5-liter naturally aspirated engine, and pe refers to the 0-liter naturally aspirated engine. Both engines are equipped with Mazda's Chuangchi Blue Sky technology. The Mazda model with a 5-liter naturally aspirated engine is the Anxera.
Global trade data integration services
author: 2024-12-23 23:44How to verify supplier credibility with data
author: 2024-12-23 22:13Global supply chain risk assessment
author: 2024-12-23 22:10How to capitalize on trade incentives
author: 2024-12-23 22:09Top global trade data insights
author: 2024-12-23 22:09HS code-driven sectoral analysis
author: 2024-12-24 00:02HS code mapping to non-tariff measures
author: 2024-12-23 23:24Marine exports HS code insights
author: 2024-12-23 22:48HS code-based tariff reconciliation
author: 2024-12-23 22:39Marine exports HS code insights
author: 2024-12-23 22:08416.76MB
Check587.87MB
Check857.33MB
Check166.54MB
Check855.46MB
Check828.49MB
Check866.79MB
Check343.22MB
Check173.78MB
Check146.69MB
Check154.36MB
Check328.13MB
Check791.41MB
Check848.61MB
Check266.62MB
Check465.86MB
Check148.19MB
Check384.47MB
Check222.42MB
Check588.59MB
Check625.47MB
Check848.72MB
Check318.92MB
Check131.32MB
Check191.54MB
Check421.51MB
Check522.79MB
Check835.84MB
Check239.24MB
Check392.87MB
Check794.53MB
Check166.15MB
Check757.28MB
Check167.14MB
Check533.49MB
Check218.54MB
CheckScan to install
Real-time commodity flow tracking to discover more
Netizen comments More
60 Global HS code classification standards
2024-12-23 23:54 recommend
2208 Export planning using HS code data
2024-12-23 23:50 recommend
662 Brazil import trends by HS code
2024-12-23 22:31 recommend
96 Gourmet foods HS code classification
2024-12-23 21:33 recommend
597 How to analyze trade seasonality
2024-12-23 21:31 recommend