1. The reason for the blockage is the carbon deposition in the engineIf the impurities on the fuel injector or in the fuel block the fuel injector channel, you should pay attention to the following points when the fuel injector is blocked. First, do not coax the accelerator with your big foot, especially when the fuel injector is blocked, the big foot will cause the fuel injector to be completely damaged.
2. Fault analysis of low voltage of fuel injector loop: introduction of faults; the fuel injector is an important executive component of the engine, which is mainly responsible for receiving the signal of the computer ECU, and the receiving command is responsible for fuel injection. Generally, it is determined by the oil injection pulse width. Generally, after a failure, the engine will shake and lack of cylinder, and it can't even catch fire.
3. The blockage of the fuel injector will seriously affect the performance of the car. The reason for the blockage is that the carbon in the engine is deposited on the fuel nozzle or the impurities in the fuel fuel block the fuel nozzle passage. After the car runs for a period of time, the fuel system will form a certain amount of sediment.
4. Incorrect air-fuel ratio: an air-to-air mixing ratio that is too thin will increase the combustion temperature, and the increase in combustion temperature will cause the engine temperature to increase, and of course it is easy to explode. The octane value of fuel is too low: The octane number is an indicator of the explosion resistance of fuel. The higher the octane number, the stronger the explosion resistance.
5. The work of the fuel injector will seriously affect the performance of the engine. The blockage of the fuel injector will seriously affect the performance of the car. The reason for the blockage is that the carbon in the engine is deposited on the fuel nozzle or the impurities in the fuel fuel block the fuel nozzle passage. The fuel injector plays a fundamental role in the power of the engine.
6. It may have burned the oil. First, check the cylinder pressure to see if there is any problem, and then repair it. Check whether there is any problem with the fuel nozzle, and correct the oil nozzle and oil pump.It is mainly considering that the weather is cold, the diesel is waxed, and the atomization is not good, it is recommended to use -10 firewood or -20 diesel.
Diesel4 JB1 engine. The 12-year-old Foton Auling is a car series of Foton Heavy Automobile Group.According to the parameters of the 2013 Foton Oling flatbed, it is known that the diesel 4JB1 engine is used in the car. It used to be a classic among domestic light diesel engines.
Cummins ISF engine. The 12-year-old Auling MRT is a Cummins ISF engine, with a power of 81kw and an average fuel consumption of 7 liters per 100 kilometers.
horsepower engine. Foton Auling has two types of engines, 158 horsepower and 160 horsepower. 158 horsepower engine: maximum power 84 kilowatts and maximum torque 260 Nm, 160 horsepower engine: maximum power 86 kilowatts, maximum torque 280 Nm, both of which are more powerful than 160 horsepower engines.
Foton Cummins engine. Engine is a machine that can convert other forms of energy into mechanical energy.According to the data of the official website, the 12-year-old Foton Auling uses the Foton Cummins engine.
The 8L diesel engine carried by Foton Scenic G7 is a diesel model widely used by Foton, which belongs to the 4JB1T series. The maximum power of this engine is 70kW/3600rpm and the maximum torque is 225N.m/1800~2400rpm.
Japan's 50-bell engine. The Foton diesel version of the scenic g7 is equipped with a 4JB1T diesel engine with a displacement of 2L. It is a Japanese 50-bell engine, which is relatively fuel-efficient and has good performance.
Foton Scenic G7 Parameters: Scenic G7 is equipped with 486 gasoline engine and 4JB1T diesel engine respectively to meet the multiple needs of different consumer groups.
In terms of power performance, the new scenery G7 is equipped with 486 self-aspirated gasoline engine and 4JB1T diesel engine respectively to meet the multiple needs of different consumer groups.
The scenery G7 is still good. It is equipped with 486 gasoline engine and 4JB1T diesel engine respectively to meet the multiple needs of different consumer groups. This model takes a high route.
Yes. According to the information on the official website of Foton Automobile, the 0 engine of Foton Scenic G718 is equipped with a Mitsubishi 4K22 diesel engine and adopts a multi-point electric injection method.
1. JB1 is a diesel engine for light vehicles developed and produced by Isuzu Japan in the late 1970s. Introduced in China in the mid-1980s, it was widely used in light trucks, pickup trucks, SUVs and other models, and won a large market share with its strong power, low fuel consumption and durability.
2. ZTE's flagship diesel pickup truck adopts the 4JB1 engine of Isuzu technology. This engine has been used in Jiangling pickup trucks and Foton Oling pickup trucks for a long time. It is the most mature diesel engine that has withstood the market test at present. Low fuel consumption, strong power, excellent emissions, low noise, compact structure and good reliability are the outstanding advantages of this engine.
3. JB1 is the model of Jiangling Isuzu domestic engine, which is the engine model marked by Jiangling automobile manufacturer.
4, the t four-wheel drive 4JB1CT version is equipped with an 8T diesel engine from Isuzu_ (4JB1CT) in Japan. Maximum horsepower: 72KW, maximum torque: 220n·m, maximum speed: 130km/h, the reliability, power and fuel economy of the engine are good, and many domestic models use this engine.
5. How much horsepower is jb1? This is an engine of Isuzu. There are many engines under this model. 4jb1 has three engines of different power, which are 57kw, 68kw and 85kw. Converted into horsepower, it is 77 horsepower, 92 horsepower and 115 horsepower respectively.
Yes, the engine is originally imported from Japan, with powerful functions. The 4J engine can even be said that all the engines of Isuzu are very powerful and fuel-efficient. You can also take a look at the D-MAX, which adopts the new Isuzu 4JK1 engine.
JB1 is a diesel engine for light vehicles developed and produced by Isuzu of Japan in the late 1970s. It was introduced in China in the mid-1980s and has been widely used in light trucks, pickup trucks, SUVs and other models. It has won a large market share with strong power, low fuel consumption and durability.
First of all, 4jb1 is an engine of Isuzu. Depending on the model, the engine can be divided into many different engines.Among them, 4jb1 has three different power engines, namely 57kw, 68kw and 85kw, which are 77 horsepower, 92 horsepower and 115 horsepower respectively after conversion.
Global trade metadata enrichment-APP, download it now, new users will receive a novice gift pack.
1. The reason for the blockage is the carbon deposition in the engineIf the impurities on the fuel injector or in the fuel block the fuel injector channel, you should pay attention to the following points when the fuel injector is blocked. First, do not coax the accelerator with your big foot, especially when the fuel injector is blocked, the big foot will cause the fuel injector to be completely damaged.
2. Fault analysis of low voltage of fuel injector loop: introduction of faults; the fuel injector is an important executive component of the engine, which is mainly responsible for receiving the signal of the computer ECU, and the receiving command is responsible for fuel injection. Generally, it is determined by the oil injection pulse width. Generally, after a failure, the engine will shake and lack of cylinder, and it can't even catch fire.
3. The blockage of the fuel injector will seriously affect the performance of the car. The reason for the blockage is that the carbon in the engine is deposited on the fuel nozzle or the impurities in the fuel fuel block the fuel nozzle passage. After the car runs for a period of time, the fuel system will form a certain amount of sediment.
4. Incorrect air-fuel ratio: an air-to-air mixing ratio that is too thin will increase the combustion temperature, and the increase in combustion temperature will cause the engine temperature to increase, and of course it is easy to explode. The octane value of fuel is too low: The octane number is an indicator of the explosion resistance of fuel. The higher the octane number, the stronger the explosion resistance.
5. The work of the fuel injector will seriously affect the performance of the engine. The blockage of the fuel injector will seriously affect the performance of the car. The reason for the blockage is that the carbon in the engine is deposited on the fuel nozzle or the impurities in the fuel fuel block the fuel nozzle passage. The fuel injector plays a fundamental role in the power of the engine.
6. It may have burned the oil. First, check the cylinder pressure to see if there is any problem, and then repair it. Check whether there is any problem with the fuel nozzle, and correct the oil nozzle and oil pump.It is mainly considering that the weather is cold, the diesel is waxed, and the atomization is not good, it is recommended to use -10 firewood or -20 diesel.
Diesel4 JB1 engine. The 12-year-old Foton Auling is a car series of Foton Heavy Automobile Group.According to the parameters of the 2013 Foton Oling flatbed, it is known that the diesel 4JB1 engine is used in the car. It used to be a classic among domestic light diesel engines.
Cummins ISF engine. The 12-year-old Auling MRT is a Cummins ISF engine, with a power of 81kw and an average fuel consumption of 7 liters per 100 kilometers.
horsepower engine. Foton Auling has two types of engines, 158 horsepower and 160 horsepower. 158 horsepower engine: maximum power 84 kilowatts and maximum torque 260 Nm, 160 horsepower engine: maximum power 86 kilowatts, maximum torque 280 Nm, both of which are more powerful than 160 horsepower engines.
Foton Cummins engine. Engine is a machine that can convert other forms of energy into mechanical energy.According to the data of the official website, the 12-year-old Foton Auling uses the Foton Cummins engine.
The 8L diesel engine carried by Foton Scenic G7 is a diesel model widely used by Foton, which belongs to the 4JB1T series. The maximum power of this engine is 70kW/3600rpm and the maximum torque is 225N.m/1800~2400rpm.
Japan's 50-bell engine. The Foton diesel version of the scenic g7 is equipped with a 4JB1T diesel engine with a displacement of 2L. It is a Japanese 50-bell engine, which is relatively fuel-efficient and has good performance.
Foton Scenic G7 Parameters: Scenic G7 is equipped with 486 gasoline engine and 4JB1T diesel engine respectively to meet the multiple needs of different consumer groups.
In terms of power performance, the new scenery G7 is equipped with 486 self-aspirated gasoline engine and 4JB1T diesel engine respectively to meet the multiple needs of different consumer groups.
The scenery G7 is still good. It is equipped with 486 gasoline engine and 4JB1T diesel engine respectively to meet the multiple needs of different consumer groups. This model takes a high route.
Yes. According to the information on the official website of Foton Automobile, the 0 engine of Foton Scenic G718 is equipped with a Mitsubishi 4K22 diesel engine and adopts a multi-point electric injection method.
1. JB1 is a diesel engine for light vehicles developed and produced by Isuzu Japan in the late 1970s. Introduced in China in the mid-1980s, it was widely used in light trucks, pickup trucks, SUVs and other models, and won a large market share with its strong power, low fuel consumption and durability.
2. ZTE's flagship diesel pickup truck adopts the 4JB1 engine of Isuzu technology. This engine has been used in Jiangling pickup trucks and Foton Oling pickup trucks for a long time. It is the most mature diesel engine that has withstood the market test at present. Low fuel consumption, strong power, excellent emissions, low noise, compact structure and good reliability are the outstanding advantages of this engine.
3. JB1 is the model of Jiangling Isuzu domestic engine, which is the engine model marked by Jiangling automobile manufacturer.
4, the t four-wheel drive 4JB1CT version is equipped with an 8T diesel engine from Isuzu_ (4JB1CT) in Japan. Maximum horsepower: 72KW, maximum torque: 220n·m, maximum speed: 130km/h, the reliability, power and fuel economy of the engine are good, and many domestic models use this engine.
5. How much horsepower is jb1? This is an engine of Isuzu. There are many engines under this model. 4jb1 has three engines of different power, which are 57kw, 68kw and 85kw. Converted into horsepower, it is 77 horsepower, 92 horsepower and 115 horsepower respectively.
Yes, the engine is originally imported from Japan, with powerful functions. The 4J engine can even be said that all the engines of Isuzu are very powerful and fuel-efficient. You can also take a look at the D-MAX, which adopts the new Isuzu 4JK1 engine.
JB1 is a diesel engine for light vehicles developed and produced by Isuzu of Japan in the late 1970s. It was introduced in China in the mid-1980s and has been widely used in light trucks, pickup trucks, SUVs and other models. It has won a large market share with strong power, low fuel consumption and durability.
First of all, 4jb1 is an engine of Isuzu. Depending on the model, the engine can be divided into many different engines.Among them, 4jb1 has three different power engines, namely 57kw, 68kw and 85kw, which are 77 horsepower, 92 horsepower and 115 horsepower respectively after conversion.
Food processing HS code insights
author: 2024-12-24 03:00International market entry by HS code
author: 2024-12-24 02:57HS code-driven supply chain benchmarking
author: 2024-12-24 02:24Food additives HS code classification
author: 2024-12-24 00:55Leveraging global trade statistics
author: 2024-12-24 00:43Medical consumables HS code data
author: 2024-12-24 02:54HS code-based segment analysis for FMCG
author: 2024-12-24 02:48Benchmarking competitors’ trade volumes
author: 2024-12-24 00:32Automotive supply chain transparency tools
author: 2024-12-24 00:27HS code-driven cost-benefit analyses
author: 2024-12-24 00:23492.77MB
Check397.28MB
Check677.79MB
Check316.92MB
Check863.88MB
Check658.83MB
Check622.19MB
Check933.21MB
Check785.94MB
Check787.47MB
Check574.38MB
Check663.42MB
Check212.62MB
Check592.49MB
Check118.74MB
Check133.73MB
Check245.32MB
Check464.34MB
Check869.42MB
Check273.18MB
Check311.77MB
Check435.22MB
Check715.59MB
Check495.48MB
Check558.84MB
Check543.29MB
Check633.17MB
Check415.92MB
Check393.58MB
Check724.73MB
Check564.46MB
Check187.36MB
Check687.73MB
Check728.93MB
Check275.58MB
Check395.61MB
CheckScan to install
Global trade metadata enrichment to discover more
Netizen comments More
1973 HS code alignment with sustainability targets
2024-12-24 02:45 recommend
60 HS code categorization for finished goods
2024-12-24 02:41 recommend
1124 HS code compliance for Nordic countries
2024-12-24 01:49 recommend
398 Leather goods HS code classification
2024-12-24 01:23 recommend
2709 How to forecast trade demand spikes
2024-12-24 00:35 recommend